Check my ZIP

What does a roof replacement cost in Florida?

Short answer

There is no single roof replacement cost in Florida. For Port St. Lucie, the Remodeling 2025 Cost vs. Value Report (www.costvsvalue.com) lists $36,295 for an asphalt shingle roof replacement and $57,090 for a metal one.1 Those are city figures for a defined model project, not a quote for your roof.1 Your roof's size and scope will differ.23

By Howe.to editorial team. Updated .

Illustrative image: AI-generated illustration of a one-story stucco house with a dark gray standing-seam metal hip roof, a palm tree, grass, and light clouds.

How does roof replacement cost in Florida compare with national figures?

The prices here come from that same report.4 Its national average is $31,871 for an asphalt shingle roof replacement and $51,865 for a metal one.4 That is a national average, not a Florida price.4

The South Atlantic region lumps Florida in with other states. For that region, the report lists $32,253 for asphalt shingles and $50,181 for metal.5 It’s a regional average, not a price for any one home.5

Miami lists $39,729 for shingles and $64,142 for metal, and Jacksonville lists $33,356 and $50,900.67 Like Port St. Lucie, each is a city figure for the same model project, so don’t average them into one Florida price.167

© 2025 Zonda Media, a Delaware Corporation. Complete data from the Remodeling 2025 Cost vs. Value Report can be downloaded free at www.costvsvalue.com.8

That 2025 report has no page for Orlando, Vero Beach or Fort Pierce.1

What job do those numbers describe?

Read the fine print.

For shingles, the model job is a tear-off down to bare wood sheathing.2 It prices 30 squares of fiberglass shingles, at least 235-lb, with at least a 25-year warranty.2 New underlayment, drip edge and flashing go on a rectangular hip roof with two skylights.2

The metal model assumes 3,000 square feet of standing-seam metal.3 It adds an ice-barrier membrane at the perimeter and premium synthetic underlayment.3

Your house is not the model. A new roof on it won’t price out exactly like either one.23

Which Florida code rules can raise the price?

Florida’s residential code requires a tear-off, not a re-cover, when the existing roof already has two or more layers of covering.910 The same goes when the old covering is wood shingle or shake, slate, clay, cement or asbestos-cement tile.910

When the covering on an existing wood-deck home comes off and gets replaced, the code also requires roof-deck attachment under R908.7.1 and a secondary water barrier under R908.7.2.910 Homes first permitted under the Florida Building Code are exempt from that section.910

Repairs have limits too. The code caps them at 25% of a roof or roof section in any 12 months, unless the whole roof or section meets current code.911 If your roof was built, repaired or replaced under the 2007 Florida code or later, only the repaired part has to meet current code, under section 553.844 of the Florida Statutes.911 Our guide to Florida’s roof repair limit walks through it.

Timing matters this year. The Ninth Edition of the Florida Building Code (2026) takes effect December 31, 2026, and it keeps these reroofing rules substantively the same, though some wording changed.1210

Permits come first. Florida law makes it unlawful to alter or repair a building without first getting a permit from the enforcing agency.13 If a bid skips the permit, ask why.

Does shingle, tile or metal change what you pay?

A tile roof replacement starts with the frame. The Florida Division of Emergency Management (FDEM) advises having the roof structure checked before switching from shingles to heavier tile.14 The code also requires clay and concrete tile to follow the maker’s instructions or FRSA/TRI recommendations.9

For shingles, FDEM advises picking a product whose wind rating matches or exceeds the design wind speed for your area.14 FEMA’s high-wind shingle fact sheet says to use roofing nails, not staples, and stainless steel nails within 3,000 feet of saltwater.15 That is FEMA guidance from a 2005 fact sheet, not a Florida code rule.15

Metal has its own needs. FDEM notes most residential metal roofs sit on plywood or OSB roof decks, and it recommends considering an improved underlayment when installing one.16

Our guide to shingle, tile or metal roofs in Florida compares the three in more detail.

What should you ask a roofer before you sign?

Get every answer in writing. Then compare bids line by line, because two quotes with different scope are not the same job.

  • Is this a full tear-off, and if not, why does the code allow a re-cover?
  • Who pulls the permit, and is it in the price?
  • Does the bid include roof-deck attachment and a secondary water barrier, or is my home exempt?
  • How many squares are you pricing, with which product and underlayment?
  • What nails will you use, and are they stainless near saltwater?

If an insurer or buyer has asked about your roof’s condition, our guide to four-point inspections in Florida covers that side.

FAQ

Is metal roofing more expensive than shingles in Florida?

Yes. In each of the three Florida cities cited here (Port St. Lucie, Miami and Jacksonville), metal costs more than asphalt shingles.167 Jacksonville shows $50,900 for metal and $33,356 for shingles, both model-project figures rather than quotes.7

Can a roofer put new shingles over my old roof?

Not always. The code requires a tear-off when the roof already has two or more layers, or when the old covering is wood shingle or shake, slate, clay, cement or asbestos-cement tile.910

Does Howe.to give roof prices?

No. Howe.to does not give prices, inspect roofs or check licenses. Only a contractor’s written quote prices your actual roof.

How Howe.to can help

Answer a few short questions about your roofing project, then choose which local companies may contact you about it. Start my roofing request to see the local companies available in your area. Howe.to is not a contractor, inspector or insurer.

Choose the work you need

Free for homeowners. Hire only if you want to.
Check my ZIP